How To Assign Ip Address In Windows

This will bring you to the Network and Sharing Center.

Tags: Trusted Essay Writing ServiceEssay On Community ServiceTkam Boo Radley EssayFirst Person In Narrative EssayDavis Moore Thesis SociologyEducation Argumentative Essay Topics

The knowledge of static IP configuration is vital in modern organizational environments as many do not completely utilize automatic IP assignment; it is also vital knowledge when trying to troubleshoot IPv4.

If you're still running a Vista system, here's where you can learn how to configure an IP address in Windows Vista.

This screen gives the option to configure a number of different network parameters.

Since we want to change the interface IPv4 IP address this option must be selected from the window.

Select the Windows 7 Orb on the bottom left-hand corner and select the control panel option as shown below: There are several views which are available for the control panel; by default the category view is used.

How To Assign Ip Address In Windows

When using the category view the option that you need to select is called View network status and Tasks, as highlighted below.DHCP is basically a system whereby a host, like a router or server, gives out IP addresses to devices so that they can communicate with the host and with each other over the network.Each device on the network has to have a unique IP address.The DNS server which will be configured is 4.2.2.2.These options are shown in their correct locations in the following figure: Once these options have been entered on the screen simply press Ok on both property screens and the configuration of a static IP is complete.Sean holds certifications with Cisco (CCNP/CCDP), Microsoft (MCSE) and Comp TIA (A and Network ).By default, most computers and devices on the network get their IP addresses via DHCP.In order to change to a static IP address the option to Use the following IP address must be selected; once this is done the option to enter the IP address parameters is enabled and the Use the following DNS server addresses option is selected.For the purpose of this article the IP address 192.168.1.100 is used with a subnet mask of 255.255.255.0 and a default gateway of 192.168.1.1.Once this option is selected the properties button will be enabled; press the properties button.Once the properties button is pressed the IPv4 properties window is displayed which shows that the interface is currently configured to obtain both its IP address and its DNS server information automatically.